about a month ago my head gaskest on the drivers side blew out and i replaced it.. everything worked fine then one of my pistons snapped in half so i had to redo the whole motor and everything but when i filled the radiator up there is a leak from under one of the heads and there doesnt seem to be a problem with anything.. new gaskets.. bolts tight.. nothing appears to be warped.. . can someone tell me what might be causing this?
2007-07-02 09:56:43 · 2 answers · asked by jason smitherman 1 in Cars & Transportation ➔ Maintenance & Repairs
Sure it ant the water pump or a crack in the head.If knot a gasket didnt seal right.
2007-07-02 10:05:43 · answer #1 · answered by muddyriverdogz 3 · 0⤊ 0⤋
Pull the valve cover gasket off and re torque the heads (in the right order) see if that takes care of it, if not sounds like a bad gasket or one installed wrong, could also be a warped head which would cause them not to seal right. Pull the dipstick to see if water got in your oil additionally, just in case
2007-07-02 17:10:19 · answer #2 · answered by Pengy 7 · 0⤊ 0⤋