2007-07-02 06:07:59 · 13 answers · asked by barriehatton 2 in Home & Garden ➔ Maintenance & Repairs
Fiberglass and resin or contact pool supply places and they may have a kit for the purpose.
2007-07-02 06:10:31 · answer #1 · answered by Mike1942f 7 · 0⤊ 0⤋
I'd suggest epoxy resin adhesive too.
Assuming you are in the UK look for brand names like Araldite or Permabond and a host of others from supermarkets and car accessory shops.
Or silicone rubber.
Alternatively heat a large flatbladed screwdriver up in a gas flame and gently melt the plastic over the crack, then further seal with epoxy or silicone.
2007-07-02 06:21:59 · answer #2 · answered by 203 7 · 0⤊ 0⤋
In an outdoors pond, they're likely midge larvae. Do a picture seek for midge nymph or larvae and analyze with the photographs like the single under... This seek will inform you an entire lote greater approximately them than purely their call. they're very intense on the record of food for all fish. in certainty they're going to strengthen the wellbeing of your pond fish plenty greater advantageous than fish pellets. They thrive in organic and organic muck so be advantageous to pass away some around so the midge will improve and feed your fish.
2016-09-28 22:10:29 · answer #3 · answered by ? 4 · 0⤊ 0⤋
You can buy a bottle of plastic cement from a plumbers yard. It will repair almost any plastic pipe in the house so I assume it will fix your fillter.
2007-07-02 08:28:57 · answer #4 · answered by starlight 2 · 0⤊ 0⤋
You can find a product at your local home depot, or WalMart called "shoo goo" or "marine goo", these items are formulated to stick to most any surface like vinyle or plastic and are good for underwater applications.
These are also called by other names such as sportsmans goo, and are all basically the same product.
2007-07-02 06:19:34 · answer #5 · answered by Anonymous · 1⤊ 0⤋
Dry it out and use plastic model cement (available at your local hobby shop) for the repair.
2007-07-02 06:10:50 · answer #6 · answered by Anonymous · 0⤊ 0⤋
you can take a small bit of plastic or rubber sheet from your old tubes and you can paste that on your filter box firmly with a waterproof glue.
it really works.
2007-07-02 06:12:19 · answer #7 · answered by Anonymous · 0⤊ 0⤋
In the long term you need to know what type of "plastic". Generally speaking, I have found "Duck" tape to be helpful underwater.
2007-07-02 06:31:32 · answer #8 · answered by Katherine Lynn A 4 · 0⤊ 0⤋
Epoxy Resin,
2007-07-02 06:10:39 · answer #9 · answered by Anonymous · 1⤊ 0⤋
go to a car spares shop and get some Davids icopon might not be spelt right follow instructions and apply should do the job has for me
2007-07-02 08:34:35 · answer #10 · answered by capcave2002 4 · 0⤊ 0⤋