I have a failing scsi machine, but hard drive okay. want to access scsi h.d. data on another pc.
2007-06-29 04:30:31 · 4 answers · asked by quester 1 in Computers & Internet ➔ Hardware ➔ Desktops
You can purchase a SCSI card to enable moving it into your other system. Just make sure you purchase the right SCSI interface and you should be fine to connect it.
NewEgg has a couple cards (links below).
2007-06-29 04:51:45 · answer #1 · answered by Jim Maryland 7 · 0⤊ 0⤋
You have to buy a SCSI controller card (somewhat expensive) and install it in your new computer. Configure it to work with existing SCSI drive after you move it over.
As cheap and fast as other drives are now (SATA) - I would consider moving data off of SCSI... It is a dying technology.
2007-06-29 04:35:26 · answer #2 · answered by Chris V 2 · 0⤊ 0⤋
IDE/ATA, SATA, SCSI are the three standards that are broadly used on the instant. There are subcategories for all of us, which incorporate an ATA133 or an Ultrawide SCSI, and a few are obtainable in distinctive configurations, which incorporate a 2.5" computing gadget IDE/ATA frustratingchronic vs. a three.5" laptop IDE/ATA frustratingchronic. There are even distinctive rotational speeds for each well-known, which incorporate 4200 rpm, 5400 rpm, 7200rpm, and 10,000 rpm. a number of those drives are obtainable the two internally put in or as an externalchronic in a separate USB enclosure, and then some USB enclosures are USB a million.a million even as some are USB 2.0. There are even sturdy state flash RAM drives that function only like a frustratingchronic, yet have not any shifting areas. those can not somewhat be termed "Disc Drives" as there is not any disc in contact, only silicon chips.
2016-10-03 07:17:35 · answer #3 · answered by ? 4 · 0⤊ 0⤋
depends on the hardware
2007-06-29 04:33:38 · answer #4 · answered by brain 4 · 0⤊ 0⤋