What should i check first i have a 1993 ford explorer XLT and the 4x4 won't engage. I push the button and nothing, I have auto hubs. Before it went out i was just playing arround in the mud and a few days later, my 4x4 engage's by it's self. The only way i could turn it off was by turning my car off and back on. Sence then nothing. Any ideas of what i could be or what i should check first.
2007-06-28 09:33:30 · 5 answers · asked by Lauren H 1 in Cars & Transportation ➔ Maintenance & Repairs
Try http://www.therangerstation.com/ also for tech tips and info---sounds like a switch problem or a connector got corroded.
2007-06-28 09:43:28 · answer #1 · answered by paul h 7 · 0⤊ 0⤋
question i have the same truck is your's rusting in the back and what about your air conditioner does it still work? does your 4x4 light still come on check the fuse first goe the cheaper routes first by process of elimination. good luck ,
we should start a club lol
2007-06-28 09:45:37 · answer #2 · answered by blak diamond 2 · 0⤊ 0⤋
It went on automatically, and then would not shut off? It sounds like the switch itself has failed. Testing the switch for electrical continuity would be a good idea. You will need a volt meter to do so. If you do not have one you will have to visit the local mechanic.
2007-06-28 09:40:13 · answer #3 · answered by sixpac304 3 · 0⤊ 0⤋
www.explorerforum.com
Go there sign up and do a search for no 4wd.It is common problem and they have many explorer experts than can help you. I used to go there all the time when I had my exploder
2007-06-28 09:38:11 · answer #4 · answered by KEVIN 3 · 0⤊ 0⤋
there is an sensor on the tansfere case that blow,,,u can also check the relay
2007-06-28 10:38:22 · answer #5 · answered by Anonymous · 0⤊ 0⤋