English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

6 answers

you don't give any details. but it sounds like it might be your drain hose the hose must come out of the back of the washer and go up about even with the top of the washer and make a u-turn into a stand pipe ie drain pipe this prevents syphoning which it sounds like is happening.

2007-06-28 06:43:07 · answer #1 · answered by Anonymous · 0 0

make sure the height of your drain is at least the height of your machine.If not it causes a siphoning effect.most washers do not have drain switches most rely on the motor direction to drain the machine. 2 months should be under warrenty if not you might save a few bucks by calling your local vocational school most have some kind of appliance repair shop and students who are very compitent and take service calls thru the school for experience in the field as I did :) good luck

2007-06-28 13:44:53 · answer #2 · answered by scott k 2 · 0 0

Something may have come loose during installation. Look for
hose leaks, etc. It should be under warrenty though, so try to
get the sellers to come back out. For more detailed information, go to http://appliancequickfix.com/

2007-06-28 13:44:05 · answer #3 · answered by Anonymous · 0 0

You need to get a life. I can't hold my water either,but I'm old. Your's is under warrenty. Call for service.

2007-06-29 11:45:51 · answer #4 · answered by mountainriley 6 · 0 0

If it is new, it should be under warranty. It sounds like a bad drain switch. It is staying open when it should be closed.

2007-06-28 12:27:06 · answer #5 · answered by sensible_man 7 · 0 1

get your warranty and call the store.

2007-07-01 14:21:56 · answer #6 · answered by luka 5 · 0 0

fedest.com, questions and answers