If it mattes it is a RS. I thought it was as easy as pumping with the master cylinder open, but please help or refer a good website. All thats left to ride my C'Maro!
2007-06-24 08:28:51 · 3 answers · asked by john m 1 in Cars & Transportation ➔ Maintenance & Repairs
http://www.popularmechanics.com/automotive/how_to/4213448.html
2007-06-24 08:41:01 · answer #1 · answered by paul h 7 · 0⤊ 0⤋
Go to the auto parts store and buy a one man bleeder. it has a check valve so it will not reverse flow. make sure reservoir is full . you always start at the furthest point away Right rear then left rear then front right then left front . connect the bleeding tool open the bleeder at the point it only comes out the orifice not the threads. Pump very slow and when you retract go very slow. At the same time checking the reservoir level. do this about ten times or until you see clean fluid ,no dirt or air. Then close the bleeder and proceed to the next one
2007-06-24 15:40:48 · answer #2 · answered by miiiikeee 5 · 0⤊ 0⤋
you need a friend to pump the pedal while you collect the fluid and close the bleeder screw once the air is out. Don't reuse the brake fluid.
2007-06-24 15:32:38 · answer #3 · answered by Anonymous · 0⤊ 0⤋