how do i replace the lights that are in the spoiler or the wing of the car??
2007-06-24 01:01:41 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Acura
john it is factory installed i just do not know how to access the lights, thanks for your help in advance
2007-06-24 01:29:37 · update #1
take the bottom screws out and pull
they stick pretty good and then unplug it and install new LED bar if you can find one still
2007-06-24 16:33:52 · answer #1 · answered by Anonymous · 4⤊ 1⤋
Good luck, they are LED's and you would need the whole module I believe. Contact your local dealer and see if they can get a replacement unit - if it was a dealer installed factory item.
Personally if it were mine I would remove the spoiler, remove the lights, and either fill in the hole myself or have a body shop do it and repaint it to match and reinstall it.
The third brake light is not mandatory and the wire to hook up the light on your spoiler should be able to be hooked back up to your factory 3rd light in the back window, if it was disconnected in the first place. I worked in a Honda / Acura dealer and some customers wanted both lights to work and some only wanted the spoiler light to work.
Good luck
2007-06-24 06:00:38 · answer #2 · answered by Mitchman 3 · 0⤊ 1⤋
First off you need to know if the Spoiler was factory or dealer installed. Also if dealer installer was it aftermarket? Factory spoiler you can replace the LED light bar. Aftermarket if the company is still in busness?
2007-06-24 01:16:26 · answer #3 · answered by John Paul 7 · 0⤊ 1⤋