Installing a new processor?

Question

I'm installing an Athlon 3200 processor into a PC that ran an Athlon 2400. I know for a fact a 3200 will run.
What I don't know is will I have to make any adjustments to the BIOS, or will the system just plug and play?

Answer 1

Go to your motherboard vendor website and download the latest BIOS. This way you will be sure that it's supported. Then install your new chip.After that go to the BIOS ans check if the displayed clock speed match your new CPU. If yes, your good to go, if not, you may have to change it manually.

Answer 2

Hello; If what you say is correct, and the motherboard supports the 3200, then go ahead with it! Don't listen to these ppl who give you horror stories... if the motherboard supports it, it supports it! You will need to update the bios only if your mobo didn't support 3200 when you bought it, but with new firmware it now does. If the paperwork you have or the website indicates an update is needed, go ahead with it.

Once you put the new CPU in, just turn the machine on, and enjoy the increased speed (if you can notice it... you should, that's a pretty good increase!). I have installed upgrade CPUs, many times... there's nothing to do, as long as the motherboard can accept the chip (which you said it does, right?).

If you're spending money on the PC check out your current RAM situation, whats installed versus what it'd cost to max out, or at least increase RAM... often it's more important than a faster CPU! Next, check out your video card... almost as important! If you've got built in video, it's using your precious RAM! if you got a slot, buy a video card, if you don't already have one... if there's no slot, try a pci (not express!) video card, and try to get one with it's own memory! The suggestion I always make to ppl upgrading their computer: RAM, Video, CPU.

Answer 3

Its to uncomplicated. installation the CPU place your motherboard flat on precise of the anti-static bag it got here in. ensure that the lever on the cpu-socket is upright (open). retaining the CPU gently on the climate with thumb and arms, decrease it into the socket, with the intention that the arrow on the CPU fits the arrow indented into the socket (see percentunder). The processor is keyed to in great condition into the socket a undeniable way, and basically that way. little or no attempt could desire to be required to insert the CPU interior the socket. in case you may no longer get the CPU to take a seat flippantly do no longer stress it. get rid of it thoroughly and attempt lower back. ensure that the CPU is sitting flush with the socket on all aspects. No pins could desire to be seen. as quickly as you're specific the CPU is precise seated interior the socket, decrease the lever till it locks. this might require a small volume of stress. notice: those instructions will artwork for any recent CPU/motherboard mixture aside from Intel LGA 775 motherboards and processors. because of the fact the pins are equipped into the socket no longer the processor, the installation technique is somewhat distinctive for those contraptions. to place in an LGA 775 nicely matched Intel chip, you first unlatch the lever on the fringe of the socket. this allows you to open the shielding conceal over the particularly socket and the comfortable pins it includes. Be very careful which you do no longer touch the particularly pins interior the socket, as they are extremely fragile. With the conceal open, you may decrease the processor into the socket in simple terms as you may the different sort of chip. Notches interior the socket and an arrow on the two the processor and the backside left corner of the socket assist you to line the processor up wisely. as quickly as the chip is seated precise interior the socket, you may close the shielding conceal and re-latch the lever. in any different case, the orientation of the CPU could be distinctive, however the tactic of putting it is a similar for older socket chips; whether or no longer they be Intel, AMD or via processors. This handbook does not conceal slot-based processors, as they at the instant are no longer used.

Answer 4

The only info is that it'll not break, you already know 3200 can go into your existing rig replacing an 2400. But we have no further idea whether adjustment is needed. Have you checked the RAM side of the stability equation?

Answer 5

You will need to consult the manual for your motherboard to check this. Some are autosensing and some require you to change jumpers to set the speed of the processor. The manual will give you all the details and settings you require. If you dont have the manual you will need to do a search online and try to download the manual from the suppliers website.

Answer 6

Well, it depends on the Mobo, but 90% of the time its just plug any play.

The thing you have to worry about is applying the heat sink. make sure you apply a thin, even, layer of thermal grease over the bottom of the heat sink - otherwise your processor will fry.

Answer 7

it depends on the motherboard, some boards are jumperless. which means the cpu should automatically be detected. if not, you may have to change the jumpers on the board, i.e FSB (front side bus) and the multiplier. check the cpu docs and look at your motherboard manual to locate jumpers.

Answer 8

You should be able to just plug and play. It may notice the change and ask you to hit F1 to confirm changes and continue, but other than that it should be no problem

Answer 9

Check your motherboard's manual and set the FSB jumpers to auto or accordingly to your new processor. Check that your cooler supports your new CPU.

Answer 10

its plug and play

the bios forgets the processor at every reboot anyway