2007-06-20 15:16:29 · 11 answers · asked by hotlilredhead01 1 in Cars & Transportation ➔ Car Makes ➔ Mitsubishi
Nope, the lug patterns are different on different cars.
¬¿¬
2007-06-20 15:19:26 · answer #1 · answered by M00ND0CT0R 6 · 1⤊ 0⤋
not all will fit has to be the same stud spacing, center bore and offset.
All DSM's (Talon/Eclipse/Laser/Avenger/Sebring) and 3000GT/Stealth models have a 67.1mm (2.64") centerbore and a 5x114.4mm (4.5") bolt pattern
The stock offset for DSM and 3000GT/Stealth wheels is +46mm
Clearance is the primary reason to change offset. For example, on 2G cars, a 225mm wide tire will just fit with the stock offset, leaving about 4mm of clearance to the suspension. This is about the minimum clearance to fit without rubbing, as the tire will flex under cornering. In order to fit a 235mm wide tire on the car, the offset must be adjusted so the tire moves outward, away from the suspension. Since a 235mm tire is 10mm wider than a 225mm tire, it must have an additional 5mm of clearance on the inside. So you need at most a +41mm offset to fit 235's
2007-06-22 22:25:19 · answer #2 · answered by shane d 3 · 0⤊ 0⤋
No they won't fit. We found that 5 lug off some Ford products will fit, ( ranger, explorer). If you want to make for sure put one on your Jeep to see for yourself. You need to keep in mind not only lug pattern but also back spacing and hub size will make a difference to. Good Luck
2016-05-21 04:43:05 · answer #3 · answered by ? 3 · 0⤊ 0⤋
NO. Just because they are five lug rims does not mean they will fit. the rim size has to be the same or close to the same size for them to fit.
2007-06-20 15:20:54 · answer #4 · answered by Anonymous · 0⤊ 0⤋
There are a lot of different 5 lug patterns out there. You have to find the bolt diameter of your wheels.
2007-06-20 15:20:39 · answer #5 · answered by Fordman 7 · 0⤊ 0⤋
no, but some makers do. Sorry, I just dont remember which ones fit a Jeep/Eagle. I think Chevy/GM does. And ford/chrysler dont. or the other way around, but like i said i dont remember. sorry
2007-06-20 15:23:00 · answer #6 · answered by c d 1 · 0⤊ 0⤋
No. Wheels are all different.....cars have different size lug patterns..........4.25 4.50 4.75.....so on
go to ur local tire shop and ask at the front desk and they will know
2007-06-20 15:22:00 · answer #7 · answered by MNATSAKANOV A 2 · 0⤊ 0⤋
No. Some rims are measured in metric. But they do have adapter plates that you can purchase.
2007-06-20 15:20:25 · answer #8 · answered by Tom Thumb 3 · 0⤊ 0⤋
may just do a reseral it might be just try it you will automatically figure it out by your self
2007-06-20 15:27:41 · answer #9 · answered by Anonymous · 0⤊ 0⤋
no u have to find out bolt patten u have
2007-06-20 15:19:34 · answer #10 · answered by Anonymous · 0⤊ 0⤋