2007-06-20 10:41:00 · 4 answers · asked by miramira 2 in Home & Garden ➔ Maintenance & Repairs
contamination. you should use sodium dichlor as your sanitizer while the water is warm in the summer. use 1 lb per 10,000 gallons of water one time per week. also you can use a product called sea klear green is is a water clarifier that binds small particles together so that your filter catches them more easy. if you have a cartridge filter you will probably also have to clean the cartridges if you have a d. e. filter you should backwash your filter very well with your water level as high as you can get it this will allow you to back was as long as you can same thing if you have a sand filter.
2007-06-20 12:07:03 · answer #1 · answered by D R 3 · 0⤊ 0⤋
If you have the kind of pool filter unit that uses the fine white powder as the filtering agent, there could be a problem where it is letting this powder get into the water circulating stream. The powder is supported onto various kinds of porous substrates; if this is damaged, the powder gets through to the other side and into the pool. Also, I knew someone who back flushed their filter with valves set the wrong way and blew all the filter agent into their pool and caused the milky color you describe. I hope this is of use to you.
2007-06-20 17:21:36 · answer #2 · answered by Flying Dragon 7 · 0⤊ 0⤋
Take a sample of pool water to your local pool store. They will analyze it and give you advice
2007-06-20 11:01:48 · answer #3 · answered by Tom A 3 · 1⤊ 0⤋
It might be a chemical reaction.
2007-06-20 10:46:20 · answer #4 · answered by Sophie (my golden dog) 2 · 0⤊ 0⤋