This was built in the 40's.
2007-06-20 04:59:00 · 2 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
Wash it with a TSP solution then clear water to remove any residual stain/paint remover and oils, then let dry for 24 hours. After that lightly sand with 1000 steel wool to get an evenly textured surface and wipe with a clean cloth(preferably t-shirt type so no lint). Finally re-stain and use the steel wool between staining to prevent an uneven finish. Seal final product with clear (high/medium/low shine) sealant to protect and preserve. Good Luck!
2007-06-20 05:09:52 · answer #1 · answered by Walking on Sunshine 7 · 1⤊ 0⤋
Lightly sand the furniture before staining. If you use multiple coats use steel wool between coats but make sure each coat is completely dry before beginning the next coat.
2007-06-20 05:03:59 · answer #2 · answered by Anonymous · 0⤊ 0⤋