The right blinker works fine but when I try to use the left it doesn't work. The light comes on but doesn't blink. The indicator in the dash stays lit and dosen't blink either. It blinks when the hazards are on but otherwise it doesn't. When I try to turn to the left the switch doesn't reset like it does when I switch it to turn right. I checked all the bulbs and they are all fine. Don't know what's wrong with it.
2007-06-19 15:50:08 · 8 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
if all the bulbs are good but does not blink you need to replace turn signal switch. this will also fix the "When I try to turn to the left the switch doesn't reset " problem.
2007-06-20 08:52:38 · answer #1 · answered by Sundew 4 · 1⤊ 1⤋
It isn't the relay if your right blinker is working. One of your bulbs is probably corroded, burnt out or has a bad connection. Check the bulbs and the housing for corrosion and replace the bulbs and make sure the connections are secure. This should fix your problem. It will be the bulbs that are supposed to blink when the left turn is in place.
2007-06-19 15:56:34 · answer #2 · answered by PIP 2 · 1⤊ 0⤋
Try replacing the bulb and make sure you use the correct number bulb. A lot of bulbs look alike and have similar numbers but act entirely different.
If it weren't for the fact that it blinks when the hazzards are on, I would say it might be something else, but I really think its the bulb.
2007-06-19 15:53:44 · answer #3 · answered by tabulator32 6 · 0⤊ 0⤋
There is a bad bulb on the left side. Turn on the 4 way flasher and compare each side. You will see that one or more bulbs on the left are out!!
2007-06-19 15:55:25 · answer #4 · answered by fire4511 7 · 1⤊ 0⤋
it could steal be a bulb or some cars have a flasher fuse for each side and it could be the switch on the steering coloum.
2007-06-19 15:54:30 · answer #5 · answered by al y 1 · 0⤊ 0⤋
you more than likely have a bad bulb in it ,or the flasher has gone bad,if you,ll look real good at the bulb you,ll probably see that its out,try replacing it its a cheap repair if it works,good luck.
2007-06-19 16:00:59 · answer #6 · answered by dodge man 7 · 0⤊ 1⤋
you have a bulb out and it is stopping the loop of current.
2007-06-19 17:55:20 · answer #7 · answered by keith_19798@yahoo.com 3 · 0⤊ 0⤋
i might get some acquaintances to help u or circulate to a automobile mechanic man or woman and if u cant cope with to pay for it i might circulate on line and discover out the thank you to repair my automobile dot com desire i helped u luv sydney
2016-11-06 23:54:04 · answer #8 · answered by ? 4 · 0⤊ 0⤋