I shave my head a few times every summer, and I did a couple times in high school for swim meets.
1: Buzz your head. This makes the whole process a lot easier and you'll use fewer blades.
2: Apply a quality shave cream or gel. I like Edge and Gillette. Make sure that you cover everything liberally. I would recommend doing this in stages, as you shave it, perhaps a hand-sized area at a time, rinse, then the next hand-sized area.
3: Make sure you use a good razor, this is probably the most important part. Brand new is definitely the route to take. I would recommend the HeadBlade (it's designed specifically for shaving heads), the Mach 3, or the Gillette Fusion. I don't like using a Quattro because it doesn't flex the right way for the best angles. You may want to use more than one razor, but that's up to you.
4: Shave your head. Make short strokes "against the grain" for the smoothest possible shave. Make sure you rinse out the blade after every stroke. You may want to shave across the grain too, just to make sure you don't miss anything. This will all work very well and painlessly if you don't use a lot of pressure. That's the reason I pointed out that you may want more than one blade, it prevents razor burn and that often leads to the bumps on your head.
5: When you're done, rinse in cold water. That closes up the pores and makes it harder for dirt and oil to get in there. After that you can add aftershave or lotion, I haven't had a problem with either.
I know that was a lot of things, many of which you may know, but they can all contribute to the bumps on your head if you're not careful.
2007-06-19 12:43:05
·
answer #1
·
answered by DTSTriGuy 2
·
1⤊
0⤋
1
2016-05-26 04:03:18
·
answer #2
·
answered by Betty 3
·
0⤊
0⤋
Make sure BEFORE you shave your head that you take a shower. Wash you head...even if you barely have any hair. Stay in the shower at least 10-15 minutes. Then use shave cream and follow with a good moisturizer...maybe even some baby oil...something that won't irritate your skin.
2007-06-19 11:11:03
·
answer #3
·
answered by Hot_Momma 2
·
0⤊
0⤋
Don't use a razor, use hair clippers that the barbershop uses. Razors cut the hair at a slant leaving the hair as a sharp barb that can grow back into the skin and cause razor bumps.
Hair clippers don't cut the hair at an angle, but evenly across. This should get rid of your razor bumps.
Peace.
2007-06-19 16:16:51
·
answer #4
·
answered by yaknow 3
·
0⤊
0⤋
For the best answers, search on this site https://shorturl.im/awl4p
Ideally soften the hair before shaving by taking a shower or bath. If that's not possible, wet your hair properly with warm, soapy water. Keep it soaked for at least two minutes. According to experts, "wet hair cuts better and easier than dry hair, and is more likely to cut evenly and not at an angle"(1). b. A good shaving cream reduces friction and irritation, so don't neglect to use it. And don't neglect to work up the lather real hard. Keep it on for at least two minutes. This makes the skin tender. Give more emphasis to areas prone to bumps by allowing the shaving cream to work longer. c. Some people have a tendency to stretch the skin while shaving or shave against the grain of the growth. Don't do either. And please don't go over the same area more than twice. d. It's good to save, but don't ever save on the blade by using it repeatedly till you forget the count. Replace it regularly. According to shaving experts, "shaving with a dull blade increases the chances of hair tearing unevenly" (1). e. On the other hand, don't go head over heels on double or triple blades. According to shaving experts, "the 'lift and cut' effect of multi-blade razors is something people with PFB generally try to avoid"(1). So the way out is to use a single blade razor. f. Using depilatories instead of a razor to remove hair is an option for those suffering from razor bumps. For them, products like Nair or Neet are available. But heed the warning of the experts. According to them, "depilatories work by dissolving the hair so it can be washed off. The chemicals used in depilatories are strong, and may cause irritation"(1). its kinda alot but i hope it helps! helped me!
2016-04-11 06:17:46
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
Use Shaving Cream.
♥ Miley
2007-06-19 11:14:12
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
make sure you use a new blade each time if possible. instead of shave cream use hair conditioner. it helps the razor glide smoothly and it will leave your head really soft.
2007-06-19 11:08:39
·
answer #7
·
answered by racer 51 7
·
0⤊
0⤋
use the shave cream from the brand of shick. (sp.?)
2007-06-19 11:07:22
·
answer #8
·
answered by Jelly 3
·
0⤊
0⤋
use lotion :P
2007-06-19 11:06:39
·
answer #9
·
answered by Anonymous
·
0⤊
0⤋