my dryer does not tumble anymore but it still gets hot?

Answer 1

Sounds very like a belt that has broken ,don't use it without belt as that's how fires start in dryers ♥

Answer 2

Most likely problem is a worn or broken belt. Other problems that will cause the dryer to not tumble include a motor problem or broken door switch. This website has suggestions and directions for checking these items.

http://www.partselect.com/dryer+dryer-wont-tumble+repair.htm

Answer 3

It could be a belt or it be the drive motor. This depends on the make and model. Look up your model on Sears parts and take a look at the parts diagram. This will let you determin if your model is belt or idler wheel drivin. You can also order your replacement part from the same webite. Go to sears.com and click on parts. Then punch in your model #, it should pull up your machine.

Answer 4

It sounds like your belt just broke, look to see if it's tumbling when it's running, if not, then the belts broken. Either call someone or try and do it yourself, it's not that hard.

Answer 5

Some dryers are belt driven. You may want to check that before you run it again.

Answer 6

More than likley your drive belt is broke or slipped off, remove back panel and you can see the drive but make sure you unplug the power first.

Answer 7

Probably the belt that runs the tumbler. No big deal to fix.

Answer 8

If you have a Lowe's near you they have belts...under $10

Answer 9

belt off idler pulley,broken drive belt,defective idler pulley,broken idler springs,drum binds.

Answer 10

http://appliancequickfix.com/