How do you change the water filtration system filter on a whirlpool gold imperial series (ultra plus) refigera

Answer 1

Go to Whirlpool.com and enter your model number. You should be able to access an online how-to. If you're talking about changing a cartridge, it could be a very simple job to replace if it's showing through the grille at the bottom front. Just rotate it a quarter turn to the left (you might have to use pliers) and pull straight out. Don't be concerned about leakage, as there are o-rings. Then simply insert a new cartridge and turn one quarter clockwise. Then you have to bleed the air out of the system. Use a one or two quart container and fill it from your water dispenser. Done!

Answer 2

I have the brita pitcher because the faucet attachment seems clunky and bulky for my sink space. the brita filters make the water smell and taste clean, we have pretty hard water around here. as a sidenote, the Culligan pitcher filter refills fit the brita pitcher, both use charcoal filtration, and they cost a bit less to replace. they say to change the filters every 6 to 8 weeks but I go 5 or 6 because I use tons of water.

Answer 3

If it's the same as the older ones, they come out hard, we had to use a screw driver but, they just pop in.
We had to call Sears service office and a very nice girl led use through the process.

Answer 4

do a google search on your item "Whirlpool refrig" ( use your product Numbers for best results) manuel. Pick out the best search and get your question answered! This will tell you. You should change them regularly.