the brake line comes off of a block that has lines going in and out of it will air get into these other lines
2007-06-18 10:04:42 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
You have to bleed all the brakes after opening the brake system at all. Otherwise the air will just continue traveling around.
2007-06-18 10:07:48 · answer #1 · answered by Ferret 4 · 0⤊ 0⤋
All cars since the late 1960s have two separate hydraulic systems. When you open the lid of the master cylinder you can see the reservoir is split in two parts. You will only need to bleed the rear brakes.
2007-06-18 17:20:46 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Yes, I think so for sure. Unfortunately, some of the bleeder screws might shear off and you'll end up replacing wheel calipers or cylinders. Of course you can try to retap the threads, but it's not worth it. You can cut the line where the metal's still good and reflare it right on the vehicle for inserting a new brake line section.
http://www.mityvac.com/pages/info_service_bb1.asp
2007-06-18 17:15:58 · answer #3 · answered by bobweb 7 · 0⤊ 0⤋
Yews you will have to bleed the brakes, If you have ABS then there is a certain order you will have to bleed them, that order you will have to research
2007-06-18 17:23:15 · answer #4 · answered by Pengy 7 · 0⤊ 0⤋
yes after you are done bleed all you brake lines.
2007-06-18 17:17:47 · answer #5 · answered by luka 5 · 0⤊ 0⤋
yes. it will be hard for you to bleed the abs pump though.;
2007-06-18 22:04:34 · answer #6 · answered by keith_19798@yahoo.com 3 · 0⤊ 0⤋
yes you will need to bleed all4 corners
2007-06-18 17:16:06 · answer #7 · answered by bigblock 2 · 0⤊ 0⤋