does anyone know a general idea what it would cost for the unit?
2007-06-18 00:38:43 · 8 answers · asked by dani543 1 in Home & Garden ➔ Maintenance & Repairs
Chances are, it'll be at least a 2 1/2 ton unit.
Base line is usually 500 sq.ft a ton.
You'll probably get a 3 ton though. Especially since the price difference is so little.
Depends on the window count, your insulation status, and how the ductulator looks.
If it's just a change out, in our area, the least would be around 2000 dollars. Any real work involved and it'll be 3 grand on up
One note, if you used to have an evap system, you need to oversize the refrigeration system to accommodate the larger duct.
A lot of HVAC mechanicis don't do that and the customer ends up with a slow blowing system that barely keeps up with the needs.
2007-06-18 01:11:34 · answer #1 · answered by rangedog 7 · 1⤊ 0⤋
If you had a single residential unit that cooled your entire 3,000 sq. ft. home then I'd stick to that size as you either have a well insulated home or live in a relatively cool climate. Otherwise, I believe that you may need a combination of two units to adequately cool your home, especially if you live in a warm climate. I have a two story 2800 sq. ft. home in a warm climate. I have a 4 ton downstairs and a 2 1/2 ton upstairs. Concerning your saving money by buying the unit on your own, it isn't wise to do this although you can save money. Local supply houses normally will not sell to individuals. For a distributor to honor the warranty it has to be sold to and installed by a licensed contractor. You can buy online from many sources but you will have much difficulty if the unit quits during the warranty period. Good luck!
2016-05-18 08:18:00 · answer #2 · answered by ? 3 · 1⤊ 0⤋
1200 Sq Ft House
2016-09-29 00:38:30 · answer #3 · answered by ? 3 · 0⤊ 0⤋
Square footage is not the only criteria for sizing a unit. A good contractor will figure in the number of windows and doors and other info. While oversizing a unit is a waste of money, undersizing will cause it to work harder. Just guessing, I would think you will get a 2 to 3 ton unit. A lot of the price depends on local labor costs and the type unit you buy.
2007-06-18 00:48:58 · answer #4 · answered by sensible_man 7 · 0⤊ 0⤋
My house is about 1350 sq ft, and 2 yeard ago, I had a new unit (2.5 ton, 13 SEER) installed for $1300.00. Have a number of heating/cooling contractors - at least 3 - come to your house, and give you an estimate.
2007-06-18 03:34:03 · answer #5 · answered by dokon@sbcglobal.net 4 · 1⤊ 0⤋
2 1/2 ton Labor and materials should start around $3000. Get yourself several estimates, If all of the duct work is good the price should be less.
2007-06-18 00:47:20 · answer #6 · answered by russbillen 4 · 0⤊ 0⤋
2 1/2 o 3 tons depends the state or weather on your area.
2016-01-31 15:44:14 · answer #7 · answered by Ernesto 1 · 1⤊ 0⤋
1 ton unit shouild be fine
2007-06-18 03:39:01 · answer #8 · answered by Anonymous · 0⤊ 6⤋