now the switch is replaced and the headlights are still going on and off with out warning and now if i tap the signal light switch the light headlights flicker and go dim or cut off and cut back on..could this mean the signal light switch is bad because sometimes when i turn my signal on i hear a scratching sound as if a fuse is about to blow or something
2007-06-17 15:14:55 · 4 answers · asked by cutiepy983 4 in Cars & Transportation ➔ Maintenance & Repairs
*switch*........
2007-06-17 15:20:42 · update #1
Time for a high low beam switch. called a turnsignal combo switch.
2007-06-17 15:18:38 · answer #1 · answered by John Paul 7 · 0⤊ 0⤋
Well the problem was not your headlight switch,did you check the high/low beam switch it's located about halfway down the column,it's only connection with the signal switch is byway of a steel rod that goes between the sig switch and beam selector.The other possibility is the daylight running light module that is giving you grief
2007-06-17 15:24:57 · answer #2 · answered by the bear facts 5 · 0⤊ 0⤋
it sounds like you need a multifunction switch. check recalls on that it maybe covered. some are. like on an explorer
2007-06-17 16:03:46 · answer #3 · answered by keith_19798@yahoo.com 3 · 0⤊ 0⤋
the problem is in the steering column
2007-06-17 15:23:02 · answer #4 · answered by smokey 7 · 0⤊ 0⤋