English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

my sisters got one and is really really mad

2007-06-16 16:48:56 · 7 answers · asked by courtney s 1 in Home & Garden Do It Yourself (DIY)

7 answers

You can out Elmers glue over and let it dry. Then peel it off and the splinter shoud come out with it. If it's too deep, then you probably need to sterulize a needle and dig it out. Make sure you wah well after removing, and put Neosporin on the wounded area.Good luck!

2007-06-16 16:57:05 · answer #1 · answered by debijs 7 · 2 0

depends where the splinter is?
use tweezers and a needle to bring it to the surface, you dip the needle in Alcohol. With tweezers you should be able to remove it very slowly not to break it, otherwise , you will have to use the needle again. Once it is removed use peroxide where the slpinter was

2007-06-16 17:11:53 · answer #2 · answered by joedward6788 3 · 0 0

do you mean splinter and if so how could it be mad. take a needle and soak the tip in alcohol and lightly scrape the splinter towards the opening. when you can see the end grab it with tweezers and pull the rest of the way out.

2007-06-16 17:03:14 · answer #3 · answered by william w 5 · 0 0

A new utility knife blade works great. In my experience works better than a needle.

2007-06-16 18:17:27 · answer #4 · answered by stedyedy 5 · 0 0

They say to put a cut potato on it to draw it out!!

2007-06-16 16:53:00 · answer #5 · answered by Cheryl 6 · 0 0

tweezers or a needle point

2007-06-16 16:57:09 · answer #6 · answered by Drew 2 · 0 0

Use a needle.

Trust me, it doesn't hurt.
(o:

2007-06-16 16:56:39 · answer #7 · answered by TheBacchanal 2 · 0 0

fedest.com, questions and answers