When trying to restart it after running fine, nothing happens. No clicks, no electricity, no door locks. Then after 30 minutes to an hour, it starts fine. Anyone help with this
2007-06-16 08:01:05 · 5 answers · asked by chasmo9592 1 in Cars & Transportation ➔ Car Makes ➔ Chrysler
First try and move the shifter to N and try to start it if it starts then the N switch is bad, Try and remove the battery cables and clean the inside of the cable and the battery post outside reinstall and tighten them and try to start it, it should start fine Good Luck and GOD Bless
2007-06-16 08:04:49 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Next time it happends, try to move or "jiggle" the wires that go through the firewall. Some of these cars had problems with corrosion in the plug on the firewall.
2007-06-16 08:10:14 · answer #2 · answered by Anonymous · 0⤊ 0⤋
your battery cables may be loose and when the battery gets warm the cables expand causing poor contact with the battery. it usually solved the problem every time i had that happen too.
2007-06-16 08:05:05 · answer #3 · answered by george 2 6 · 0⤊ 0⤋
Time to replace battery.
2007-06-16 08:03:39 · answer #4 · answered by Anonymous · 0⤊ 0⤋
This is what happens when you buy American. Ask Dr. Z!
2007-06-16 08:08:39 · answer #5 · answered by Anonymous · 0⤊ 3⤋