Will it blow? Amp or Speaker?...is there a way to wire them for compatibility?
2007-06-15 18:09:02 · 4 answers · asked by Max D 1 in Consumer Electronics ➔ Music & Music Players
If you want to use one speaker for each channel then get a couple of very heavy duty 4 ohm resistors and wire one in series with each speaker. That will protect the amp until the speakers melt. Wear ear plugs as a precaution!
2007-06-16 03:14:23 · answer #1 · answered by The original Peter G 7 · 0⤊ 0⤋
Btw Tom, you additionally can do matrix embody sound additionally. 2 audio device + - to the amp + - L amp + - R take all + area wiring and connect them mutually, in case you have solder you may get a extra appropriate audio connection or use cut back plastic or goop glue works additionally for an excellent connection. Now do the same with - area on all audio device. connect + R audio device to the AMP + precise area connect - R audio device to the AMP - precise area connect + L audio device to the AMP + Left area connect - L audio device to the AMP - Left area Now in case you decide on for matrix embody sound particularly of connecting the 4ohms - with the - 8ohms then into the - L/R AMP - area connect those directly to the each 4ohms speaker - area. So now if something with embody sound result that is going to now be performed. Left 4 ohm - ======= precise 4 ohm -
2016-11-24 23:44:15 · answer #2 · answered by reeves 4 · 0⤊ 0⤋
put a 4ohm resistor on each speaker wire to achieve the 8 ohm Resistance
2007-06-15 18:30:44 · answer #3 · answered by jimnrara 3 · 0⤊ 0⤋
wire amp and speaker at 2 om safe way to go
2007-06-15 18:14:24 · answer #4 · answered by sam s 1 · 0⤊ 0⤋