Is there any products out there to put under the feet of the front load washing machine to hold it in posistion whilst it is spinning at 1000rpm +
2007-06-15 02:44:06 · 10 answers · asked by interact_au 2 in Home & Garden ➔ Cleaning & Laundry
please make sure that the machine is level, all the way around, front to back, side to side, Go to a home center and pick up a carpet no slip pad, the ones that have holes in them and cut in and place under each leg.
2007-06-15 03:43:32 · answer #1 · answered by Mike G 2 · 0⤊ 0⤋
Moving A Washing Machine
2016-10-14 00:42:33 · answer #2 · answered by decaneo 4 · 0⤊ 0⤋
Check the load. When it is shaking badly lift the lid and let it stop rotating. Chances are that the wet cloths are not evenly distributed in the drum. Things like towels and blue jeans are heavy enough to throw the washer around if they are on the same side of the drum. Spread the wet cloths out and close the lid. That will re-start the spin cycle. If you have evened everything out the violent shaking will be gone. It will still vibrate but should not make a noise. I am assuming that all four washer legs are firmly on the ground
2016-03-19 03:26:16 · answer #3 · answered by Anonymous · 0⤊ 0⤋
The minimal shaking of the machine is to be expected while on spin cycle. Sometimes if the machine is overloaded or perhaps you are washing something heave, such as a rug, it doesn't balance well and can make the machine to do that even more so. If it happens on normal wash and most of the time, you should be able to adjust the balance on the washer and make sure it is sitting correctly before you start washing. They usually have pegs or some kids of other support for legs that are adjustable.
2007-06-15 02:49:13 · answer #4 · answered by AmZ 3 · 1⤊ 0⤋
You should be able to adjust the feet that are at the bottom of the machine how even is the floor this sometimes cause' movement.Oh yeah and I've used the clothes pegs for hanging washing out these make excellent wedges try using the wooden ones.
2007-06-15 03:26:43 · answer #5 · answered by Mea 5 · 0⤊ 0⤋
OK. There is 1 of 2 things fitted to a front loader to stop this from happening, either a special computer controlled counter weight fitted to the back of the drum or a concrete block hung under the machine, there is nothing you can do about this yourself, call the repairers and let them take a look.
2007-06-15 02:52:21 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Check the manual. Chances are the feet are adjustable. (like a screw that you can move up and down) If you have a level place it on the machine to see if it's perfectly flat.
2007-06-15 02:47:38 · answer #7 · answered by HoHo 3 · 2⤊ 0⤋
Having sex on the washer during the high vibe cycle will tend to reduce the movement (of the machine).
It also gives new meaning to the phrase, "Doing the laundry".
2007-06-15 02:51:09 · answer #8 · answered by lunatic 7 · 1⤊ 1⤋
I would try to get 2-way adhesive strips and put them on the feet of the washer.
2007-06-15 02:48:25 · answer #9 · answered by John 3 · 0⤊ 1⤋
puttingless laundry in the washer will stop this bouncing around,are you can open it up when it does this and set the clothes differently
2007-06-15 02:48:00 · answer #10 · answered by Anonymous · 0⤊ 1⤋