2007-06-14 00:07:05 · 9 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Desktops
most likely there is a problem with your setup cd. try to make a new ISO image for your winxp cd and burn it to a new disc. or try putting your setup disc inside a freezer for an hour or as long as you can wait. then wipe it first before you use it.
sometimes this trick work especially if the damage is caused by lite scratches.
2007-06-14 00:18:41 · answer #1 · answered by Andrew 2 · 0⤊ 0⤋
Dear,
Its the problem with your setup CD. I think may be it has got crashes for which by the time installation is going on it can't able to read the Cd in that particular place where the scratch is there.
Just change the source (XP ) CD & try again.
2007-06-14 00:10:39 · answer #2 · answered by Bablu 1 · 0⤊ 0⤋
While the possiblity is good you have a dirty or scratched cd, I have run into this problem and have also found that it could be abad stick of memory causing it. If you have more than one stick of memory take one out and reboot. Try reinstalling. If it gives you the same error try the other. It is one more option if you have tried a different cd and still doesn't work. Hope this helps.
2007-06-14 00:44:18 · answer #3 · answered by kleclere1 2 · 0⤊ 0⤋
Dude, just try with another copy of the OS CD it will work..
2007-06-14 01:25:37 · answer #4 · answered by Shridhar Daddi 2 · 0⤊ 0⤋
Some time the pendrive internal file may be deleted or affected with virus . So it does not support in Mac.
2016-05-20 00:27:55 · answer #5 · answered by ? 3 · 0⤊ 0⤋
The XP disk is likely corrupted OR your hard drive is flaky.
If legal version, call Microsoft.
If not legal version, call the FBI.
Drive manufacturers have free diagnostic tools on their websites.
2007-06-14 00:13:42 · answer #6 · answered by ELfaGeek 7 · 0⤊ 0⤋
its either the CD is bad copy..or too much scratch on it...or the CD/DVD rom you are using is in bad shape...its not reading well...weak lens...try to get another copy of the cd if it has too many scratch then try again...if CD is good,...get another cd/dvd roms then plug it to your system then insert cd...then try again...
hope thsi help you.cheers
2007-06-14 00:13:00 · answer #7 · answered by JMnemonic 3 · 0⤊ 0⤋
sureley its problem with your CD, check ur cd r try with another CD. or else formate your hard disk with any other tool and try. but i hope its sureley with CD
2007-06-14 00:12:45 · answer #8 · answered by Anonymous · 0⤊ 0⤋
motherboard failing
2007-06-14 00:10:07 · answer #9 · answered by teh c 5 · 0⤊ 0⤋