URGENT: How do I connect a wireless router in one room to a wireless router in another?

Question

I have a wireless router in one room (only connected to a phone line and nothing else) in another room I have a wireless router connected to my pc via a ethernet cable. How do I connect the two so that I can access the internet? Please help this is URGENT!!!

Answer 1

you need a wireless LAN bridge or you need to physically connect the 2nd router with a segment of Ethernet to the 1st router. then you can configure the 2nd router as an Access Point.

or depending on the type of wiring that is in your house, apt, etc. you could use 2 extra pairs in the phone jack if it's Cat 3 or higher to connect to a port on the 1st router if the phone line goes from the one room to the other.

Answer 2

Yes, it is possible to do this. You need to set up a wireless bridge that can be configured for the two wireless devices in question. Just pick one where you can get the right gain and type of wideband needed for the two devices. If one is a FHSS and the other is a DSSS, you need a wireless bridge that will support both technologies. The biggest challenge you will have is distance and signal strength with this situation.

You also need to be careful and keep your total output less than the FCC regulated amount (100 mWatts) in making the connection or you could pay some hefty fines for the connection. Distance isn't a major problem, though. Most wireless devices can transmit about 300 feet.

For the ideal set-up, get the wireless routers in a room (preferable with a window nearby) on the second floor or top floor of the unit in each townhouse. Then, you will need to set-up the wireless bridge in a location that can contact both wireless routers. You may have to do this outdoors depending on your set-up.

Then, just configure the wireless bridge to connect into each of the LAN's and it will bridge the connections.

Keep in security in mind, though. This connection will now be broadcasting to a number of townhouses next to you. Ideal security would be a VPN between the two LAN's. If this is not fessible, at least use the highest level of WEP encryption supported by your devices. You should also secure the computers on the network -- namely shared drives and folders. Otherwise, your great connection will be great for others around you too!

Answer 3

Routers don't have the facility to connect wirelessly to each other.

You need a wifi adapter in your PC or a length of ethernet to plug into the router connected to the 'phone line.

Answer 4

For a handbook, you could pass to the help component of the netgear web site and see in the journey that they supply thoughts. it would want to be executed yet is a actual discomfort to get issues set good. in case you do it then the second one router can in ordinary words be used with stressed out connections to pcs.

Answer 5

YOU CAN'T, you need a repeater or a bridge.