Everything was working fine last night. Now,when I try to put the key in and try to turn it, it does not move any further. I have set of three keys, none works, keys are in perfect shape. Any thoughts?
2007-06-10 02:53:47 · 4 answers · asked by Marina 2 in Cars & Transportation ➔ Maintenance & Repairs
Move the stearing wheel back and forth as you try to turn thr key!
2007-06-10 02:56:41 · answer #1 · answered by bob D 3 · 0⤊ 0⤋
Try moving the Steering wheel while you turn the key sometimes takes alot of pressure both ways if this does not work try moving the key up and down towards the rough sides and turning at the same time if that works get a new key at the dealer or new ignition set.
2007-06-10 10:01:02 · answer #2 · answered by ASmiles1 4 · 0⤊ 0⤋
Spray a little WD40 or similar lubricant in the key port. Let sit for a few minutes. Inspect the keys for wear & damage. Make sure they are all cut to the same length & depth & no burrs. Try moving the steering wheel while turning the key.
_ _ _
2007-06-10 10:05:02 · answer #3 · answered by Mr. T 7 · 0⤊ 0⤋
if it's an automatic trans.try to move the shifter up and down.the locking mechanism has probably got the tumbler assembly locked down.and if not try the other lock lever on steering column and make sure you have the right key.see if the key opens the doors,and if you haven't replaced the tumbler assembly in the steering column,it will be the right one for the engine... good luck..and move the steering wheel right and left to free it up too.......
2007-06-10 10:01:55 · answer #4 · answered by jcr 3 · 0⤊ 0⤋