2007-06-09 18:48:41 · 6 answers · asked by richard g 1 in Cars & Transportation ➔ Maintenance & Repairs
There is a screw in sensor in your engine block and it is wired to your temp gage it could be the wire is off its contact at the sensor or the temp Gage or the sensor
2007-06-09 19:44:12 · answer #1 · answered by burning brightly 7 · 0⤊ 0⤋
Check your temperature sensor. It should be located somewhere near the thermostat on your engine block. Usually if you gauge does not work then your sensor quit on you. You can also see if you have a fuse specific to that guage but I doubt it.
2007-06-09 18:53:02 · answer #2 · answered by viking165301 2 · 0⤊ 0⤋
if you temp. sensor only has one wire like most do unplug it and ground it to car engine block. the gauge should read all the way hot. if it does replace the sensor.if that has no effect then you need to check wiring between gauge and sensor and the gauge itself.
2007-06-10 06:44:11 · answer #3 · answered by charliecoesr 2 · 0⤊ 0⤋
Replace the tempreture sensor, check the wiring first. That is it.
2007-06-09 19:01:43 · answer #4 · answered by izzie 5 · 0⤊ 0⤋
Check and / or replace temperature sensor.
http://www.autozone.com/N,4294897631/shopping/locsSelect.htm
2007-06-09 19:01:06 · answer #5 · answered by Lover not a Fighter 7 · 0⤊ 0⤋
check fuse first and if not it try temperature sensor on block
2007-06-09 18:57:03 · answer #6 · answered by tdb2007 1 · 0⤊ 0⤋