I have 2 presser tank's the first one has a switch with a presser gage on it. After I empty both tank they both had no presser. I can not get the first tank to hold any presser. The second tank I can fill it up to 40psi when the tank is empty. I then turn my pump back on and I still have no water presser.
2007-06-09 14:28:13 · 2 answers · asked by john_lewis97 1 in Home & Garden ➔ Maintenance & Repairs
There should be a air valve on the top of the tank where the bladder is refilled to the proper pressure. If there is water at this connection your bladder has a hole in it. See http://wellmate.com/ or the manufactures name on the side of the tank. Find your specific tank model number then look at the web site for the proper air pressure. You will need a small air compressor to re pressurize. A hand pump would work but it will take some time.
2007-06-10 02:20:28 · answer #1 · answered by ibfixen 1 · 0⤊ 0⤋
If your tank has a bladder it might be shot. I just had to replace mine and it's really not that expensive. good luck. Sorry I should have said you need to replace the tank.
2007-06-09 14:47:24 · answer #2 · answered by Mrs. Fuzzy Bottoms 7 · 0⤊ 0⤋