I've changed everything wiring harness, CDI box, Plugs, Coils and wires.
2007-06-08 07:50:18 · 2 answers · asked by Barry 1 in Cars & Transportation ➔ Motorcycles
If you get power to your coils then it must be between your coils and y our plugs. Test your coils with a multimeter. You should get a pretty high voltage for an output (check online for values). Test your plugs with a spark plug tester. If they pass, get new plug wires. If it isn't fuel injected, make sure your carb is clean and your airflow is not blocked.
2007-06-08 08:22:03 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Since you're going the hit & miss, parts changing route, change the pulse generator (it acts as the points on a CDI ignition).
It's connected to the stator and they have to be changed together, as it's one complete unit.
You should've bought a shop manual to troubleshoot the problem.
Think of all the money you could have saved.
Purchase a shop manual.
http://www.motocom.com/motorcycles/
2007-06-08 08:04:40 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋