Should I overclock my e6600 core 2 duo?

Question

I just bought all the parts for a brand new computer, and the Processor I went with was the Core 2 Duo e6600. This sucker is a 2.4 Ghz and I am reading everywhere that people are clocking them up to 2.7-3 GHz with stock cooling. I don't care much for stock coolers so I bought a Rosewill Z series: http://www.newegg.com/Product/Product.aspx?Item=N82E16835200026
The question is should I overclock? Im using this computer for my recording studio so I will be encoding audio with it and processing effects in real time and occasionally some video. Is the performance boost going to be worth it? My friend says Over clocking shortens your processor life. What would you do and why?

Answer 1

You've already bought the coolers, yer gonna overclock it. Most mainboards and BIOS nowadays make overclocking easier by multipliers, voltages etc. accessable through the BIOS.

If this is your first time around... unless you want to concentrate your efforts on core temperatures instead of the music, it's a very bad idea. If you want to build a music empire, start with a strong foundation. Now for the music side advice.

DON'T overclock. Set it up try it out with a couple of sessions once your done. THEN, since you know you're going to overclock it anyway, overclock it and do a couple more sessions with one person whose ONLY job is to watch core temp of the computer. There may also be glitches and hangs that result from the overclocking that can be taken into account. If the turbovette doesn't overheat or slide out in the curves, by all means - full speed ahead.

Sidenote: I was warned when I bought the mainboard I now use that a customer returned that exact board - literally melted. At dual 2.8Ghz stock, I'm not pushing for glory and never even bothered to put the hood on it. Heat kills. Save your music to an external USB Hard Drive, luck.

Answer 2

Why could you elect to overclock a center 2 Duo CPU? it fairly is already quickly sufficient. Overclocking is for the old days with slower CPUs and you elect to push the juices out of them. in case you do decide to overclock, you desire good reminiscence chips. additionally, you have gotta use some Taiwan made motherboards, alongside with Abit, Asus, Gigabyte and etc via fact those boards are made for that with an incredible style of techniques which you would be able to play around interior the BIOS. My %. is Asus. For a cpu cooler, purely get a fan with intense RPM yet make advantageous its has a low noise ratio.

Answer 3

It all depends on what you do. Is 200-300mhz really going to help you that much? You have to weigh the pros and cons. You can shorten the life of your CPU and get an extra 300mhz, or leave it and let your PC run as intended. However, most chip manufacturers will design the CPU to operate at a higher frequency then intended anyway. Just make sure you got a kick *** heatsink and cooler.

Answer 4

It is not the overclocking itself that damages or shortens the life of the processor, it is the HEAT. Experienced overclockers use the best cooling solution so that cpu temperature stays within acceptable levels. COOLING is the key to great overclocks. Personally, I like the Thermalright Ultra 90 or 120.
Look at what my idols did w/ their E6600:
http://valid.x86-secret.com/show_oc?id=166676
http://valid.x86-secret.com/show_oc?id=137093
http://valid.x86-secret.com/show_oc?id=168130
http://valid.x86-secret.com/show_oc?id=134356

Go ahead and overclock your E6600. If you want to sleep soundly, just stay within stock voltages; you won't toast anything there, guaranteed.