ok here's the story...i need to reset my router so i held the reset button for 10 seconds and after that i tried to log into the user interface screen (192.168.1.1) and i typed admin for the user name and for the pw. it didn't work...so i left the user name blank and i tried admin for the pw. it didn't work. i need to get into this screen and nothing im trying is working. any advice what to do?
2007-06-06 10:06:49 · 4 answers · asked by sticksnslats91 2 in Computers & Internet ➔ Computer Networking
I went to Linksys and could not find the model # you gave but for model WTR54GS I got.
From:
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859932316&packedargs=sku%3DWTR54GS&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3231632316B01&displaypage=download#versiondetail
How to Access the Web-based Utility
To access the Web-based Utility, launch Internet Explorer or Netscape Navigator, and enter the Router’s default IP
address, 192.168.16.1, in the Address field. Then press Enter.
A password request page will appear. Leave the User Name field blank. The first time you open the Web-based
Utility, use the default password admin. (You can set a new password from the Administration tab’s Management
screen.) Then click the OK button.
Hope this helps
Doug
2007-06-06 10:38:30 · answer #1 · answered by DOUGLAS M 6 · 0⤊ 0⤋
I had the same problem with my SMC wbr14g. Try smcadmin or a blank password. I found those in the FAQ for my device on smc.com.
2007-06-06 17:29:35 · answer #2 · answered by Anonymous · 0⤊ 0⤋
passwords are usually ; "password" or they are left blank...username is usually : admin or administration...press ur reset button hold it down and disconnect the power from it while ur holding the reset button..let go after 10-15 secs...
2007-06-06 17:14:53 · answer #3 · answered by Anonymous · 1⤊ 0⤋
try password for the password and leave user name blank
2007-06-06 17:15:30 · answer #4 · answered by GTB 7 · 0⤊ 0⤋