I'm trying to repair windows. I put the cd in and it says, Which windows installation would you like to log onto. What do I do!?
2007-06-04 21:02:26 · 5 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Desktops
need more info first
2007-06-04 21:05:24 · answer #1 · answered by stick 2 · 0⤊ 0⤋
Enter number 1. or C:
I take it your pressed R for repair after booting the CD
After choosing C: it should come to a command prompt
At the prompt TYPE: fixmbr and press enter, answer yes
Next at command propmt TYPE: fixboot and press enter, answer yes
When done TYPE: exit and press enter. The computer will shutdown and reboot. Don't go back in to the CD to boot, let it continue to boot itself.
These commands are only used if your windows refuses to boot up or boot into windows. Your question wasn't specific as to a problem you were having.
2007-06-05 04:13:22 · answer #2 · answered by Lee P 3 · 1⤊ 0⤋
Sounds like you accidentally installed XP twice. Start over.
Go to:
and look it up on the Sidebar.
TIP: Windows repair rarely works.
2007-06-05 04:08:33 · answer #3 · answered by ELfaGeek 7 · 0⤊ 2⤋
What you do depends on the type of repair you are trying to do. What is the problem you are trying to fix?
2007-06-05 04:11:27 · answer #4 · answered by Mike C 6 · 1⤊ 0⤋
It's pretty hard to repair broken windows, you usually just have to buy a new pane of glass. But be careful with your fingers and try to wear protective gloves or you'll get a nasty cut! And use that invisible tape, not the transparent kind, it'll show.
2007-06-05 04:06:21 · answer #5 · answered by Anonymous · 0⤊ 3⤋