the rust is in the cab of the truck on the floor boards and only a little on the roof. i wont it not to come back . and i wont get rid of it
2007-05-30 12:17:37 · 6 answers · asked by jelly bean 1 in Cars & Transportation ➔ Maintenance & Repairs
here's a great DIY kit at a great price. Choose the RustSeal Frame Coater kit for $52 by KBS Coatings. Has enough product to clean, prep & permanently seal your rusted areas. Like POR, but more user friendly. First sand to remove the loose flaky rust then proceed with the 3 steps of the kit. RustSeal Loves rusted surfaces to seep into and interlock with the metal for superior adhesion. draws the moisture out of the metal & air to cure.
& Dries into rock hard non porous high performance coating.
3 steps:
http://www.kbs-coatings.com/KBS-Frame-Coater-Kit-P106C30.aspx
2007-05-30 15:16:39 · answer #1 · answered by motorcoater 3 · 4⤊ 0⤋
Sand down 2 the bare metal, past all the rust. then spray the areas with rust-oleum clean metal primer. if the rust has eaten holes in your truck you can fiberglass and bondo them.
2007-05-30 12:25:22 · answer #2 · answered by crytough 1 · 0⤊ 0⤋
cut the bad metal out and weld in new sheet metal and when done coat the whole floor with POR-15, it will never rust again.
2007-05-30 14:30:06 · answer #3 · answered by mister ss 7 · 0⤊ 0⤋
http://www.por15.com/
Rust will always come back unless you totally seal out any air from getting to it or cut it out.
2007-05-30 13:50:59 · answer #4 · answered by paul h 7 · 0⤊ 0⤋
I really like the KBS stuff and would recommend that.
http://www.kbs-coatings.com
2007-05-31 10:05:32 · answer #5 · answered by bonksteronline 3 · 1⤊ 0⤋
remove the section of sheet metal and replace it with new sheet
2007-05-30 12:22:07 · answer #6 · answered by h.a x 3 · 0⤊ 0⤋