how can i distribute or config my internet connection in my office network without a PC server ( all pc are connected in the same time) I have a router (Xyzel p-600) and hub (9 port) can anyone guide me for this configuration?
2007-05-28 13:49:15 · 2 answers · asked by jayahre b 1 in Computers & Internet ➔ Computer Networking
This is how you will make your connections.
-Cable from the wall to your Broadband modem
-Ethernet cable from broadband modem to routers WAN (Internet) Port
-Ethernet cable from routers ethernet port to a ethernet port on your hub
-Ethernet cable from your computers ethernet ports to the ethernet ports on your hub and router (Depending on how many you need to connect)
Log into your router and configure it to connect to your ISP, reference the install guide and follow the step by step instructions pm how to do this.
That should do it......
2007-05-28 15:04:07 · answer #1 · answered by Taba 7 · 0⤊ 0⤋
your best bet is to change the hub for a switch. This will give you better network speed.
you WILL need a DHCP server. In most cases, you can have your router act as the DHCP server. This server serves up the PC with an IP address, DNS server and gateway information. If you do not have the capability to have the router do DHCP, then set each PC with a static IP, Static DNS and Gateway.
2007-05-28 21:03:50 · answer #2 · answered by Jeffrey F 6 · 0⤊ 0⤋