linksys router and linksys d link v2
2007-05-28 11:49:09 · 4 answers · asked by Clinton J 1 in Computers & Internet ➔ Computer Networking
You will need to reset your router back to factory defaults. To do this push the small reset button on the back of the router and count to 10. Unplug power to the router and count to 10 again. Plug the power back in and after a count of five release the reset button.
Warning::::: This will reset the router back to the way it was when you first took it out of the package. Along with resetting the IP address and passwords it will also reset your ISP info. You will need to set it back up inorder to connect to the internet again.
2007-05-28 12:02:49 · answer #1 · answered by Taba 7 · 0⤊ 0⤋
Doesn't matter if you could get onto the router or now. You would not be able to retrieve your WEP anyway, since once you enter it, you cannot display it again. You need to write it down.
Follow the directions to reset the router that others have provided above and you should be able to set your network back up with a new WEP key.
2007-05-28 19:39:46 · answer #2 · answered by Anonymous · 0⤊ 0⤋
try no username and admin for password. You can also try and reset to factory settings. You can accomplish this by turning off (pulling the plug) and finding the reset button in the back of the unit (usually near the power socket) Press and hold the reset button as you turn the unit back on.
2007-05-28 18:52:55 · answer #3 · answered by tw0cl0n3m3 6 · 0⤊ 0⤋
try the acc name: admin and the password: admin
2007-05-28 18:51:11 · answer #4 · answered by rezster0900 4 · 0⤊ 1⤋