and just wont turn on at all..i dont know what happneed to it. plz help.
2007-05-28 10:40:09 · 4 answers · asked by midi_junkie 3 in Home & Garden ➔ Cleaning & Laundry
Very carefully slide the washer out if you can. Set several buckets down and carefully unhook the discharge hose. More than likely, something clogged it and that's why the washer won't drain. If the washer is too heavy or quite full, scoop out as much water as you can and then try the above steps. Good luck.
2007-05-28 10:50:50 · answer #1 · answered by Jess 7 · 0⤊ 0⤋
Yes just like if you were to try to take gas out of a gas tank, or water out of a fish tank. Take a hose put one end in the washer the other end in a 10 gallon bucket or pail. Make sure the hose is in the water take the other end suck on it like a straw in till you get some of the water in your month then let it go in the pail it will continue to flow out of the washer into the pail. Make sure the pail is on the floor this is the only way it will work.. This may sound nasty but it works.
2007-05-28 10:58:18 · answer #2 · answered by kewlsouth 1 · 0⤊ 0⤋
Sounds just like mine. Repair man is ordering parts for it but until he comes back I have to drain each time. Mine is a front loader and all I have to do is undo the filter on the bottom at the front. The water pours out onto the floor and when empty it will finish the cycle.....mostly. I have a floor drain not far from machine but I am still sick of the wet mess.
2007-05-29 00:34:35 · answer #3 · answered by jawjar 2 · 0⤊ 0⤋
Sounds like your timer went out on you, if that's not it try the little button that's inside your washer when you close it it might be stuck. Other wise get a piece of garden hose and sifen it out.
2007-05-28 10:49:35 · answer #4 · answered by brushbanditbarbie 2 · 0⤊ 0⤋