How does a one-way mirror Work?

Answer 1

The secret is that it doesn't. A one-way mirror has a reflective coating applied in a very thin, sparse layer -- so thin that it's called a half-silvered surface. The name half-silvered comes from the fact that the reflective molecules coat the glass so sparsely that only about half the molecules needed to make the glass an opaque mirror are applied. At the molecular level, there are reflective molecules speckled all over the glass in an even film but only half of the glass is covered. The half-silvered surface will reflect about half the light that strikes its surface, while letting the other half go straight through.

So why doesn't the "criminal suspect" see the detectives in the next room? The answer lies in the lighting of the two rooms. The room in which the glass looks like a mirror is kept very brightly lit, so that there is plenty of light to reflect back from the mirror's surface. The other room, in which the glass looks like a window, is kept dark, so there is very little light to transmit through the glass. On the criminal's side, the criminal sees his own reflection. On the detectives' side, the large amount of light coming from the criminal's side is what they see. In many ways, it's the same as if people were whispering in one room while a loud stereo played in the other. The sound of the whisper might carry into the room with the stereo, but it would be drowned out by the intensity of the music.

If the lights in the room with the mirror are suddenly turned out, or the lights in the observation room suddenly turned on, then the one-way mirror becomes a window, with people in each room able to see those in the other. You can see this effect in any mirrored office building at night -- if the light is on in an office, you can see into the office just fine.

See http://science.howstuffworks.com/question421.htm

Answer 2

Most modern mirrors consist of a thin layer of aluminium deposited on a sheet of glass. This layer is called the Tain. They are back silvered, where the reflecting surface is viewed through the glass sheet; this makes the mirror durable, but lowers the image quality of the mirror due to extraneous reflections from the front surface of the glass (ordinary glass typically reflects around 4% of the light). This type of mirror reflects about 80% of the incident light. The "back side" of the mirror is often painted or coated in some way to completely seal the metal from corrosion.

Answer 3

The back of a piece of glass is coated with a highly reflective substance thereby making a mirror.

Answer 4

I'm not sure, I just know you can see the person on one side but on the other they can only see themselves in the reflection. It's pretty complicating.

Answer 5

one way

Answer 6

you look at it and you'll see an idiot