I am installing a 2002 engine in our 1997 Sunfire. I have the complete wrecked 02 for a donor car, so I have the engine harness and all parts needed. I know that I have to change out the engine computer and harness, but would like to know if I can stop short of changing out the whole dash harness to accept it.
My question is, can anyone ID what the pin locations on the master passthruogh connector under the airbox are. The block has a number and letter code to id wire location, so I assume there must be a master key to read these. There are about four wires that are not the same color from the 02 to the 97, and the 97 has one wire missing. The spot is there but no wire. I would like to compare what the differences in them are before I go and cange dashes also. I have searched online with no luck and bought the haynes manual, it does not id the passsthrough block. I have also stopped by a couple of dealers and asked but left empty handed.
Thanks, Dave
2007-05-27 03:47:51 · 3 answers · asked by Dave L 1 in Cars & Transportation ➔ Car Makes ➔ Pontiac
go to pontiac.com and the request information link ask them for it and they are more then happy to send a diagram to you
2007-06-02 14:05:14 · answer #1 · answered by firebirdws62168 3 · 0⤊ 0⤋
Wirediagram.com
2007-05-27 16:21:25 · answer #2 · answered by paul h 7 · 0⤊ 0⤋
get a haynes manual it will save time and money
2007-06-03 14:51:25 · answer #3 · answered by answerteam 3 · 0⤊ 0⤋