In the manual of the tv, it says that it can be used as a pc monitor, but it doesn't come with the lead to connect them.
It says to connect a VGA cable to the tv, and a 15 pin connector to the pc.
Where can i get the wire and connectors to do this?
Do i need anything else?
Thanks
2007-05-26 04:10:29 · 5 answers · asked by L B 4 in Computers & Internet ➔ Hardware ➔ Add-ons
Most TVs can be used as pc monitors, but they need a converter box to convert the kind of signal that monitors use into the kind of signals TV take. Graphics cards with TV out have a converter on the card.
It sounds like your TV has a converter box built in to it.
I think all you need is to plug a VGA extension lead between computer and TV. Make sure that the connectors have the right gender (are they male or female?)
Most computer shops sell leads. Maplin is a bit pricy for computer stuff, but usually has the required cables/ staff who know what you need, Take the TV manual in so they can have a look at it, if you are in any doubt.
You are unlikely to get a picture as clear as you would using a monitor, but that may not matter to you.
2007-05-26 04:35:56 · answer #1 · answered by Steve C 6 · 1⤊ 0⤋
You need a TV Box. It converts AV lead to 15 pin connect. Describe it and the salesman from computer do the remaining. Check the box before leaving
2007-05-26 04:15:29 · answer #2 · answered by TBS 3 · 1⤊ 0⤋
Just because you CAN do something doesn't mean you SHOULD do something. But yes, you can do this.
One of the best sources for cables I have found is monoprice, even their standard cables are better quality than "free in the box cables" and their premium cables are almost as good as monster at a quarter the cost.
2007-05-26 04:23:28 · answer #3 · answered by Harrison H 7 · 1⤊ 0⤋
PC World. You only need a monitor lead, nothing else.
2007-05-26 04:19:58 · answer #4 · answered by MellowMan 6 · 1⤊ 0⤋
Ebay.co.uk !
2007-05-26 05:19:03 · answer #5 · answered by Anonymous · 0⤊ 0⤋