English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

7 answers

Yes, you can...

2007-05-25 12:33:39 · answer #1 · answered by McFly 3 · 0 0

format c:/s

Note that formatting your drive or drives necessitates that you have valid partitions, or at least one "active partition" on your physical hard drive. If you're starting from scratch you'll need to run fdisk first.

To format your hard drive you'll need a boot disk. If you don't have one and Windows is still operational, go here startupdisk.html for instructions as to how to make one. If windows is "not accessible" to make one, call your local computer store or drop me an E-Mail and I might be able to help you.

Caution! Following this procedure will erase all data of your Hard Drive!

To format your hard drive:
1. With the machine turned off insert the boot disk into your A: drive, and leave it there until the end of this process.
2. Push the power switch and let it ( hopefully ) boot to an A: prompt. ( A:> )
3. If you're sure you want to proceed type: "format c:/s" ( without the " " ) The "/s" makes the drive a bootable drive by copying the file command.com to C: at the end of the procedure. You will get a warning saying that this action will erase all data on the drive. If you want to proceed press "Y" and move on. If you're formatting a partition, other than C:, or an other physical drive, leave out the " /s" when you type "format D:" or "format E:" When prompted for a "Volume Label" name your drive anything you like, or just hit "enter" for none. You can change it later if you like.

Now remove the system disk from the A: drive and reboot. If all went well it will boot normally to the C: prompt. If it didn't, you may have problems with the primary partition. Go here fdisk.html to see how you might fix it.

A note for Windows XP Users:
During the installation of XP you'll be offered the options for formatting your Hard Drive.
There is no need to do it before that. Windows XP is very capable of formatting the drive for you.

In Windows XP: If you need to format the C: Drive to do a clean install, just put the CD in your drive and reboot the machine. It will eventually offer you the option to delete the C: partition and then create a new C: partition, format it, and install on that new partition.

2007-05-25 19:38:56 · answer #2 · answered by falcon10_98 2 · 0 0

Yes.Partitions seperate drives that are on the same physical disk allowing you to perform actions like formatting one drive and not the other.

2007-05-25 19:41:32 · answer #3 · answered by Convinced 2 · 0 0

You can do it, but you have to format it using windows xp setup cd outside windows, means you have to boot the windows xp setup cd then do the format.

2007-05-25 19:35:06 · answer #4 · answered by AlexTan 3 · 0 0

Definitely. You can "slave" it then format it from another OS. USB HD adapter is the easily solution.

2007-05-25 19:36:41 · answer #5 · answered by NotSoSmart 1 · 0 0

Yes you can, but not while Windows is running as it wont allow you.

2007-05-25 19:30:46 · answer #6 · answered by Cupcake 7 · 0 0

yeah .. but if the windows was installed in C .. then no

2007-05-25 19:46:43 · answer #7 · answered by Luay14 6 · 0 0

fedest.com, questions and answers