i can see the two front sound slots (one for microphone and the other for headphone) that are attached with the casing. how can i attach them with the motherboard so that i can connect my headphone in the front slot, rather than going all the way back , to hear music?
my sound card is creative sound blaster 5.1 and the motherboard is asus
2007-05-25 04:47:20 · 2 answers · asked by MUSIC bugg MOHIT 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
Check the documentation that came with the board. It should have the speaker jumpers marked on a diagram for you. (Assuming it as a jumper for front speakers. Not all boards do)
2007-05-25 04:51:35 · answer #1 · answered by dewcoons 7 · 0⤊ 0⤋
this isn't a matter of what the motherboard can help. With at present's computers, the constraint lies with actual hardware and report structures. this signifies that you aren't to any extent further going to have any issues setting up even the biggest confusing rigidity available. the biggest presently available confusing rigidity is 2TB, so it extremely is your decrease for a unmarried rigidity. do you may want to elect more advantageous room, you could continuously installation a 2d or 0.33 rigidity. in basic terms make sure you %. up a SATA or SATA2 driive. With more recent variations of abode windows, you gained't run into any problems with report gadget, considering that NTFS helps a rigidity as a lot as 256 TB, and the older FAT32 helps as a lot as 2TB. if you're employing an truly previous version of abode windows, you in all danger can might want to partition your rigidity with a 0.33-social gathering application, considering that those variations of abode windows do not play effective with drives over 2GB.
2016-11-27 02:31:31 · answer #2 · answered by ? 3 · 0⤊ 0⤋