I have changed the flap and I have cleaned the flapper and still water flows into main bowl from flush valve.
2007-05-25 02:39:04 · 3 answers · asked by regmon007 1 in Home & Garden ➔ Maintenance & Repairs
Make sure you have the proper flapper for your crapper. Make sure the pull chain has enough slack so as not to pull on the flap. . Is the float set to the proper level? It has to keep the water level below the overflow, otherwise water will continue to flow into the bowl. Good luck
2007-05-25 02:45:58 · answer #1 · answered by Anonymous · 1⤊ 0⤋
There should be a small tube going from the fill-valve to the overflow tube. This should be above the overflow tube. Normally they have a wire clip that secures them there. If it is down inside the tube, it will allow water to flow which goes into the bowl. The water level should be 1/2 to 3/4" below the overflow tube.
2007-05-25 02:52:48 · answer #2 · answered by sensible_man 7 · 0⤊ 0⤋
the ball- cock is bad. You can take the valve apart and clean. try bending the rod that is connected to the ball (bend down a little) It should be replaced.
2007-05-25 02:51:26 · answer #3 · answered by captnron1950 2 · 0⤊ 0⤋