English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

My car has plastic headlight lenses. They are older and "foggy". I have heard that rather than replacing them (they are expensive), I can take them apart and polish them clear again, resulting in better lighting at night. What should I use to do this? Would a standard car polishing compund be best?

2007-05-24 03:45:55 · 5 answers · asked by Camper 360 1 in Cars & Transportation Maintenance & Repairs

5 answers

Parts stores sell products to clean them like Flitz ball, Meguiar's has a plastic polish and cleaner for this or try these:
http://www.mdwholesale.com/?OVRAW=headlight%20cleaning&OVKEY=headlight%20cleaning&OVMTC=standard&OVADID=1971870522&OVKWID=18105686022
http://www.lensrenew.com/
http://www.bestheadlightcleaner.com/

2007-05-24 03:55:32 · answer #1 · answered by paul h 7 · 0 0

You can now get a lens polishing kit at an auto store, like auto zone.

The fogginess of your car's lens is actually a clear coat that is applied to the plastic, to retard the UV rays from damaging the plastic. Once that clear coat is burnt from the solar rays, it becomes foggy.

Polishing your lenses will remove this old coat and you will need to apply a new coat. The kits available have all the materials you need to fix it. It will not be as good as nes, but the improvement will be noticeable. You do not have to remove your lights.

2007-05-24 03:52:44 · answer #2 · answered by Wrenchmeister 3 · 0 0

There are quite a few distinctive manufacturers of goods available right here in the U. S. for restoring diminished headlight lenses.they're relatively an outstanding liquid rubbing compound.you will could desire to confirm at a areas keep there in Australia to make certain what's available there.

2016-11-26 22:58:18 · answer #3 · answered by ? 4 · 0 0

Auto part stores sell some stuff called Lens Renew that will get the foggy/yellowness off and make them clear again....hope this helps!

2007-05-24 03:55:44 · answer #4 · answered by Anonymous · 0 0

I've used a polishing wheel on a rotary tool in conjunction with tooth paste, polishing compound or rubbing compound. You can also get polishing wheels for drills and grinders.

Start out with a course abrasive and finish with a very fine abrasive.

It would be hard to make it worse than they are now if their anything like mine get in Florida.

2007-05-24 04:09:26 · answer #5 · answered by Deer Slayer 2 · 2 0

fedest.com, questions and answers