I have a 177 weiand suoercharger fitted to a small block chev & the brake booster will be fitted to the barbed connection fitted to the base of the holley carb.
As you are not suppose to install a T piece to this fitting and install the breather connection from the engine , can anybody advise me as to where to connect the breather hose from the engine
2007-05-24 01:58:24 · 3 answers · asked by fitzy 1 in Cars & Transportation ➔ Maintenance & Repairs
Well aren't those first two answers amazingly... Ignorant? Let's run a line from a pressurized intake manifold to a breather or PCV. Amazing!
I guess your answer really depends on if you want to run a PCV system or just a breather. Most of our (all that I can remember) supercharger installs use only old school style breathers on the valve covers or hoses from the valve covers to a breather box.
If you want to set up PCV your best bet is to run a spacer below the carb with a fitting going to the PCV in one valve cover and then a breather in the other valve cover.
Good luck with it.
2007-05-24 02:33:20 · answer #1 · answered by vwhobo 4 · 1⤊ 1⤋
The breather connection usually goes to a PCV valve that screws into the intake manifold.
2007-05-24 02:23:12 · answer #2 · answered by Anonymous · 1⤊ 2⤋
You just may have to tap a new hole into the intake manifold ~~
2007-05-24 02:03:21 · answer #3 · answered by burning brightly 7 · 1⤊ 2⤋