I cant remember how to set up the bottom thread. I cant find the manual on line.
2007-05-22 20:51:46 · 5 answers · asked by Anonymous in Games & Recreation ➔ Hobbies & Crafts
http://www.brother.ca/en/products/pdf/manuals/XL2600-UG.pdf
2007-05-22 20:56:32 · answer #1 · answered by El 2 · 0⤊ 0⤋
The bobbin spool goes into the case with the tail toward your left hand. Make sure you get it all the way thru the slot or you'll have loops on the back of your fabric.
Insert the bobbin case into the machine until it clicks. Don't close the door yet.
Thread the top of the machine and hold onto the thread tail with your left hand. With your right hand, roll the flywheel away from you so the needle dips down and back up again. It should carry the bobbin thread up with it. Now you can close the door.
.
2007-05-23 13:05:59 · answer #2 · answered by Kacky 7 · 0⤊ 0⤋
http://sewingmanuals.com/Sewing_Machine_Manuals/Brother.htm
You could check through these manuals and see if one is pretty much the same as your machine. It seems to me that the bottom thread of some would be the same even with a different model. Good luck and happy sewing!
2007-05-23 07:33:53 · answer #3 · answered by Debbie C 3 · 0⤊ 0⤋
Swing your light case open as if you were going to change the light bulb. A lot of times there is a threading diagram inside there.
2007-05-23 15:13:52 · answer #4 · answered by Critter 6 · 0⤊ 0⤋
go to a sewing machine sales and repair shop and ask if they can get you one.
2007-05-24 03:48:29 · answer #5 · answered by Anonymous · 0⤊ 0⤋