I have removed the alternator and the power steering pump, and still haven't found the sensor. Does the bracket for the power steering pump that has the tensioner pulley on it have to come off as well?
2007-05-22 08:34:32 · 2 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
I own...and am blessed with a 92 Lesabre with a 3800 V6... it has a cam position issue...but slight different.... the magnet has dropped off the timing gears....the sensor is located below the water pump...follow the wires... I have changed mine... pretty easy.. but with the magnet missing...zero gain...good news the engine will run...it defaults to firing the fuel injectors all of the time... instead of sequentially...check engine light is on all of the time....has not affected gas mileage much at all.... local shop is happy to remedy this at $400 plus... but it is my work car... so I will put up with the check engine light.... hope this helps
2007-05-22 23:19:45 · answer #1 · answered by Busted Flush 3 · 0⤊ 0⤋
http://wiki.answers.com/Q/Where_is_the_cam_shaft_position_sensor
or try this
http://www.autozone.com/N,4294897087/shopping/locsSelect.htm
2007-05-22 09:28:34 · answer #2 · answered by paul h 7 · 0⤊ 0⤋