2007-05-21 08:55:41 · 14 answers · asked by frognose20 2 in Cars & Transportation ➔ Motorcycles
It is definitly a four stroke.
I owned a 1971 CL350 which is basicly the same bike with a different exhaust.
99% of the CB350 parts worked on my CL350, including all the engine parts.
SPECS
Model: Honda CB 350
Year: 1971
Category: Touring
Engine and transmission
Displacement: 325.00 ccm (19.83 cubic inches)
Engine type: Twin
Stroke: 4 <----
Power: 36.00 HP (26.3 kW)) @ 10500 RPM
Compression: 9.5:1
Bore x stroke: 64.0 x 50.6 mm (2.5 x 2.0 inches)
Valves per cylinder: 2
Fuel control: OHC
Cooling system: Air
Gearbox: 5-speed
Transmission type
final drive: Chain
Physical measures
Weight incl. oil, gas, etc: 170.0 kg (374.8 pounds)
Chassis and dimensions
Front tyre dimensions: 3.00-18
Rear tyre dimensions: 3.50-18
Front brakes: Expanding brake
Rear brakes: Expanding brake
Speed and acceleration
Top speed: 165.0 km/h (102.5 mph)
Other specifications
Fuel capacity: 10.00 litres (2.64 gallons)
2007-05-21 09:45:27 · answer #1 · answered by Pod99966 2 · 2⤊ 0⤋
1971 Honda Cb350 Parts
2016-10-19 07:49:18 · answer #2 · answered by ? 4 · 0⤊ 0⤋
4
2007-05-22 04:50:33 · answer #3 · answered by Anonymous · 0⤊ 0⤋
4
2007-05-21 08:57:31 · answer #4 · answered by Anonymous · 1⤊ 0⤋
because of the powerband, two strokes, in my opinion are more fun to drive, but, you could end up going faster on the RMz. the rmz is a torque-y bike and the YZ is screamin powerful two stroke. if its fun and speed, learn how to ride the two stroke to its full potential. two strokes need more often maintenance, but every now and then you will have to change the piston in a four stroke and replace the valves.. and thats expensive! YZ 250 top end kit is only about 150 with gaskets and all. if you want fast.. (many people may call me crazy for suggesting this) get a cr500. .... in the end the rmz may be faster but its also a matter of opinion and driving style that could influence your lap times quite a bit. In that case, i would go with the YZ250. If your not limited by the displacement (ie 125, 250 or open class) get the YZ and if you need more speed you can get a big bore 285cc kit that will really make the bike fly. However, there are more zippy 4 strokes than the rmz in my opinion. The CRF450 packs a top end punch to be envied. but limiting it to the bikes you have displayed, i would take the YZ.
2016-04-01 00:54:51 · answer #5 · answered by Anonymous · 0⤊ 0⤋
four stroke. Good bike for a beginner.
I believe there are two cylinder models and four cylinder models in 1971. The engine cylinders are inline and perpendicular to the direction of travel. These engines have overhead cams.
The 1971 has front drum brakes from the factory. Honda started putting disk brakes on the 350's in 1972.
2007-05-21 09:46:31 · answer #6 · answered by gw1500rider 2 · 2⤊ 0⤋
The Honda CB & CL 350 cc bikes are two cylinder FOUR stroke engines, and very good ones at that. FYI, in 1973 Honda sold more 350cc, CB & CL, than ALL the other combined mototcycle makers in the world sold motorcycles !
2007-05-22 05:05:38 · answer #7 · answered by Dogbettor 5 · 0⤊ 0⤋
All Honda CB series were and are 4 strokes.
2007-05-23 15:32:11 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Four stroke. All the old Honda street bikes were four stroke.
2007-05-21 09:03:27 · answer #9 · answered by silverbullet 7 · 3⤊ 0⤋
It's gotta be a four stroke. I owned a Honda CB175 and it was a four stroke.
2007-05-21 08:59:40 · answer #10 · answered by Tom 1 · 1⤊ 0⤋