I tried changing the fuse from 10 amp to 20 amp and still it blows the fuse. Any suggestions?
2007-05-19 10:50:14 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
find the short and fix it. never install a larger fuse. If this is something you are not capable of doing seek professional help
2007-05-19 10:55:06 · answer #1 · answered by bubbarub 4 · 2⤊ 0⤋
Always give year, make, engine size and model # when asking questions. We need all of that info to give an informed answer.
Some scooters have just one fuse (the main fuse).
Technologically advanced scooters have a fuse box with a fuse for different circuits (main fuse, head light, tail light, brake light, horn, turn signals).
It would also have helped to know what happened right before the fuse blew.
Like - the second you turn on the key, hit the brakes, turn on the turn signals, rev the motor to high RPMs, hit a bump in the road.
If it blows once you turn on the key, unplug every wire and connector, but leave the battery hooked up.
Start plugging things in, one at a time.
Start with the ignition switch. Then turn on the key.
Turn off the key and plug in another. Then turn on the key.
As with all electrical problems, it's a process of elimination.
Don't worry about going to a larger amp fuse. If there was a short circuit that would blow a 10 or 20 amp fuse, it would blow a 30 amp fuse before any damage was done.
2007-05-19 11:59:19 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋
Scooter Fuse
2016-12-12 12:07:11 · answer #3 · answered by satterfield 4 · 0⤊ 0⤋
look into the object that makes use of the main capability in the circuit it is blowing. if it particularly is the headlamp circuit, it is the main possibly criminal. The headlight must be dying andusing greater capability than the circuit can carry. it may additionally be which you have a pinched cord and each and each time you journey, the insulation on the cord is transforming into further and further worn till the cord is sitting direcly on steel and does not require your weight or a bouncy street to bump the copper to the steel. examine to work out you haven't any longer have been given cord under the seat or rubbing between the physique artwork and the physique. try the communicate board under for greater solutions. it ought to no longer be energetic adequate nevertheless.
2016-12-29 14:12:05 · answer #4 · answered by montogomery 3 · 0⤊ 0⤋
Trace out the wiring, and fix the short in them. Look especally for burnt wiring, or wires that are crushed or pinched. Good Luck
2007-05-19 10:52:45 · answer #5 · answered by dadforfive 6 · 0⤊ 0⤋