I need instructions on wiring a 01 villager for trailer lights, standard four connector.?

Question

There is not a quick connector for this year Villager!

The sister car is the nissan quest!! And no, there is NO quick connect for this year Villager. I need the color code for the rear tail lights

Answer 1

go to your local auto supply store (napa etc) and have them look up the "sister" car to yours.... it has exactly the same wiring as yours.... if memory serves the villager is a merc. if so then you need the Ford.

Answer 2

I would buy a cheap 12-volt test light. Get access to the rear taillight wires. Turn on taillights and try all wires with the tester until the tester lights up (the power is on that wire). Then proceed to do the same with the left and right turn signals. Splice the four connector onto the appropriate wires. Attach the white wire to a good ground. Yellow wire-attach to left turn. Green wire-attach to right turn. Brown wire-attach to the taillights. Brake lights should automatically work thru the turn signals. If the brake lights don't work, then you need to get a more elaborate trailer connector than the standard four (about $20).

Answer 3

Now-a-days the make it simple to unplug the harness at the rear of the car and plug in an adapter.

They're about $35.