I think I should get another washer my kids think I should get parts. Can anyone help?
2007-05-17 09:04:08 · 9 answers · asked by dona w 1 in Home & Garden ➔ Maintenance & Repairs
Before it can spin all the water has to drain out...possible reasons are 1 bad lid switch....2 bad pump.....it is a lot cheaper to have this fixed a compared to buying a new washer
2007-05-17 10:36:38 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Dona W
Your washer does not drain out the water or it does but the clothes are still damp after the cycle is done? If it does not drain, most likely the problem is with the pump or drain line and most of the previous advice is right. If the clothes are just damp, then there is probably nothing broken. If the load was unbalanced during the spin cycle or the washer was overloaded, the basket will never go on full speed.
2007-05-17 16:15:34 · answer #2 · answered by askGene.com 2 · 0⤊ 0⤋
You should get parts. My Whirlpool does the same thing. We are hand starting the spin now, but have talked to a repairman. who will be telling us what to do as soon as we get the washer # to him. You can order parts online, I bought my dial for small or large loads that way. Good luck.
2007-05-17 09:11:49 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Hi Dona I cant believe everyone is saying bad parts. Its usually that the pump gets something stuck in it and just needs to be taken out. If you can access the pump pull the hose off and pull out the blockage. Good luck
2007-05-17 14:37:14 · answer #4 · answered by Anonymous · 0⤊ 0⤋
If you are SURE that it agitates then you have one of two problems, either the spin tube or transmission is bad. If under five years the transmission is under warranty but the spin tube would not be
2007-05-17 10:18:30 · answer #5 · answered by appliance, HVAC Technician 3 · 0⤊ 0⤋
broken belt, you would be waiting to verify it by potential of eliminating the back pnael. Please unplug the unit first. The timer and motor are working and dealing precise it purely has no thank you to coach the tub. Belts are 5-25$ and as quickly as you get rid of the conceal you will see adjuster screws or tensioners that adjust. utilising which you will replace it your self or a provider call runs from 60-a hundred and twenty$
2016-12-11 12:23:22 · answer #6 · answered by ? 4 · 0⤊ 0⤋
If the tub spins but the water does not exit, it is probably the pump that is bad. Your choice on repair or replacement.
2007-05-17 09:08:21 · answer #7 · answered by sensible_man 7 · 1⤊ 1⤋
I am with the GE service tech, something like a sock stuck in the drain hose.
Here a link that will help also.
http://www.repairclinic.com/0088_11_1.asp
Hope it helps.
2007-05-17 14:46:27 · answer #8 · answered by etcher1 5 · 0⤊ 0⤋
I think you should call a repairman. Is it new? Is it still under warranty?
Either way.....get it checked out by someone who knows what they are doing.
Good luck.
2007-05-17 09:18:45 · answer #9 · answered by Cherry 4 · 0⤊ 1⤋