2007-05-16 14:05:26 · 5 answers · asked by hurtandconfused 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
measure the length of the rearend from axle to axle and if it's the same as yours it will work.
2007-05-16 14:09:52 · answer #1 · answered by mister ss 7 · 0⤊ 1⤋
If both of the rearends have the same # of bolts on the housing then yes, But if ya want to make it easy ,just swap out the whole rearend. Cause both the Firebird & Camaro rearends bolt in the same. Which is a whole lot easier than putting in the Diff. Cause ya have to gage ring with the pinion gear and its just a lot easier to switch the whole thing
2007-05-16 17:44:02 · answer #2 · answered by Anonymous · 0⤊ 0⤋
it will work. you have to change the ring and pinion as they are cut as a set. get a new crush sleeve when you doi it. when removing the ring gear assembly keep the spacers you have. make sure you keep them on the same side they came out of. replace the ring and pinion and you will be in business. I don't know off the top of my head if you can change the entire axle assembly...you would have to measure the width of the housing to do this..if it is the same than go for that...not a hard job.
Hope this helps
2007-05-16 14:45:57 · answer #3 · answered by Kenneth S 5 · 0⤊ 0⤋
Yes, it is compatible but it might have a different gear ratio, and the speedometer might not read correctly.
2007-05-16 16:25:09 · answer #4 · answered by Mari-Mari 6 · 0⤊ 0⤋
Please call you local chevy dealership parts dept.Give them the last eight of your VIN and they will give you the info you need.
2007-05-16 14:44:48 · answer #5 · answered by HyperGforce 7 · 0⤊ 0⤋